# Transport bar changes

**URL:** <https://iplug2.discourse.group/t/transport-bar-changes/914>\
**Category:** Uncategorized\
**Created:** [2 June 2024 12:06 UTC](https://iplug2.discourse.group/t/transport-bar-changes/914 "2024-06-02T12:06:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![olawistedt](https://yyz2.discourse-cdn.com/free1/user_avatar/iplug2.discourse.group/olawistedt/32/232_2.png) [@olawistedt](https://iplug2.discourse.group/u/olawistedt)\
**Post date:** [2 June 2024 12:06 UTC](https://iplug2.discourse.group/t/transport-bar-changes/914/1 "2024-06-02T12:06:17Z")

</div>

I have a problem with my 16-step sequencer. When the user manually moves the transport bar in the DAW, my sequencer gets out of sync.

I would be grateful if somebody can come up with a solution for this or point me in the right direction.

---

<div class="post-metadata">

**Author:** ![olawistedt](https://yyz2.discourse-cdn.com/free1/user_avatar/iplug2.discourse.group/olawistedt/32/232_2.png) [@olawistedt](https://iplug2.discourse.group/u/olawistedt)\
**Post date:** [4 June 2024 19:10 UTC](https://iplug2.discourse.group/t/transport-bar-changes/914/2 "2024-06-04T19:10:08Z")

</div>

I solved this by compare previous sample position with the new sample position.